Physics · 2019
NEET 2019 · 20 May · Code G1 · Q155
The stress-strain curves are drawn for two different materials X and Y. It is observed that the ultimate strength point and the fracture point are…
The stress-strain curves are drawn for two different materials X and Y. It is observed that the ultimate strength point and the fracture point are close to each other for material X but are far apart for material Y. We can say the materials X and Y are likely to be (respectively),
Official answer
(2)
brittle and ductile
More from Mechanical Properties of Solids
- Let a wire be suspended from the ceiling (rigid support) and stretched by a weight W attached at its free end. The longitudinal stress at any point…2023
- Two wires are made of the same material and have the same volume. The first wire has cross-sectional area A and the second wire has cross-sectional…2018
- The bulk modulus of a spherical object is 'B'. If it is subjected to uniform pressure 'p', the fractional decrease in radius is2017
- Match List I with List II: Choose the correct answer from the options given below:2026
- A wire of length L, area of cross section A is hanging from a fixed support. The length of the wire changes to L_1 when mass M is suspended from its…2020
- The Young's modulus of steel is twice that of brass. Two wires of same length and of same area of cross section, one of steel and another of brass…2015
- The maximum elongation of a steel wire of 1 m length if the elastic limit of steel and its Young's modulus, respectively, are 8 × 10^8 N m^-2 and 2 ×…2024
- Copper of fixed volume 'V' is drawn into wire of length 'l'. When this wire is subjected to a constant force 'F', the extension produced in the wire…2014
NEET (UG) 2019 Physics question, with the answer from NTA’s final answer key. Where our answers come from.