Physics · 2010
NEET 2010 · Mains · Code C · Q70
For transistor action (a) Base, emitter and collector regions should have similar size and doping concentrations. (b) The base region must be very…
For transistor action
(a)
Base, emitter and collector regions should have similar size and doping concentrations.
(b)
The base region must be very thin and lightly doped.
(c)
The emitter-base junction is forward biased and base-collector junction is reverse biased.
(d)
Both the emitter-base junction as well as the base-collector junction are forward biased.
Which one of the following pairs of statements is correct?
Official answer
(3)
(b), (c)
All Semiconductor Electronics: Materials, Devices and Simple Circuits questionsPractice Semiconductor Electronics: Materials, Devices and Simple Circuits →
More from Semiconductor Electronics: Materials, Devices and Simple Circuits
- The increase in the width of the depletion region in a p-n junction diode is due to:2020
- In the given figure, a diode D is connected to an external resistance R=100 Ω and an e.m.f. of 3.5 V. If the barrier potential developed across the…2015
- Three identical p-n junction diodes D_1, D_2 and D_3 are connected across a battery as shown in the figure. If the width of the depletion regions of…2026
- Consider the junction diode as ideal. The value of current flowing through AB is:2016
- Two statements are given below: A. When the forward bias voltage across a p-n junction diode increases above a certain threshold voltage, the diode…2026
- The output (Y) of the given logic implementation is similar to the output of an/a ____ gate.2025
- Given below are two statements: Statement I: Photovoltaic devices can convert optical radiation into electricity. Statement II: Zener diode is…2023
- The current I in the circuit shown below is: (All diodes are ideal and identical)2026
NEET (UG) 2010 Physics question, with the answer from NTA’s final answer key. Where our answers come from.