$5$Junction Diode as a Rectifier : The process of conversion of an ac voltage into a dc voltage is called rectification and the device which performs this conversion is called a rectifier. The characteristics of a $\displaystyle \mathrm{p}-\mathrm{n}$ junction diode reveal that when a $\displaystyle \mathrm{p}-\mathrm{n}$ junction diode is forward biased, it offers a low resistance and when it is reverse biased, it offers a high resistance. Hence, a p-n junction diode conducts only when it is forward biased. This property of a $\displaystyle \mathrm{p}-\mathrm{n}$ junction diode makes it suitable for its use as a rectifier. Thus, when an ac voltage is applied across a $\displaystyle \mathrm{p}-\mathrm{n}$ junction, it conducts only during those alternate half cycles for which it is forward biased. A rectifier which rectifies only half cycle of an ac voltage is called a half-wave rectifier and one that rectifies both the half cycles is known as a full-wave rectifier. (i) The root mean square value of an alternating voltage applied to a full-wave rectifier is $\displaystyle \frac{\mathrm{V}_{0}}{\sqrt{2}}$. Then the root mean square value of the rectified output voltage is : (A) $\displaystyle \frac{\mathrm{V}_{0}}{\sqrt{2}}$ (B) $\displaystyle \frac{\mathrm{V}_{0}^{2}}{\sqrt{2}}$ (C) $\displaystyle \frac{2 \mathrm{~V}_{0}}{\sqrt{2}}$ (D) $\displaystyle \frac{\mathrm{V}_{0}}{2 \sqrt{2}}$ (ii) In a full-wave rectifier, the current in each of the diodes flows for : (A) Complete cycle of the input signal (B) Half cycle of the input signal (C) Less than half cycle of the input signal (D) Only for the positive half cycle of the input signal (iii) In a full-wave rectifier : (A) Both diodes are forward biased at the same time. (B) Both diodes are reverse biased at the same time. (C) One is forward biased and the other is reverse biased at the same time. (D) Both are forward biased in the first half of the cycle and reverse biased in the second half of the cycle. (iv) (a) An alternating voltage of frequency of 50 Hz is applied to a half-wave rectifier. Then the ripple frequency of the output will be : (A) 100 Hz (B) 50 Hz (C) 25 Hz (D) 150 Hz

OR

(b) A signal, as shown in the figure, is applied to a p-n junction diode. Identify the output across resistance $\displaystyle \mathrm{R}_{\mathrm{L}}$ : 2024_CBSE_Physics_Set_Region1_Subset_Set1_QUNKNOWN__b_p11_13

2024_CBSE_Physics_Set_Region1_Subset_Set1_QUNKNOWN__b_p11_13

(A)

2024_CBSE_Physics_Set_Region1_Subset_Set1_QUNKNOWN__b_p11_15

(B)

2024_CBSE_Physics_Set_Region1_Subset_Set1_QUNKNOWN__B_p11_17

(C)

2024_CBSE_Physics_Set_Region1_Subset_Set1_QUNKNOWN__C_p11_20

(D)

2024_CBSE_Physics_Set_Region1_Subset_Set1_QUNKNOWN__C_p11_21

Physics · Semiconductor Electronics: Materials, Devices and Simple Circuits · Application of Junction Diode as a Rectifier