Physics · 2016
JEE Main · 10 April 2016, Shift 1 · Q24
A modulated signal C_m(t) has the form C_m(t)=30 sin 300 π t+10 ( cos 200 π t - cos 400 π t). The carrier frequency f_c, the modulating frequency…
A modulated signal $\displaystyle C_m(t)$ has the form $\displaystyle C_m(t)=30 \sin 300 \pi t+10 \quad(\cos 200 \pi t$ $\displaystyle -\cos 400 \pi t)$. The carrier frequency $\displaystyle f_c$, the modulating frequency (message frequency) $\displaystyle f_\omega$, and the modulation index $\displaystyle \mu$ are respectively given by :
Official answer
(2)
$\displaystyle f_c=150 \mathrm{~Hz} ; f_\omega=50 \mathrm{~Hz} ; \mu=\frac{2}{3}$
More from Communication Systems
- A TV transmission tower has a height of 140 m and the height of the receiving antenna is 40 m. What is the maximum distance upto which signals can be…2019
- The TV transmission tower at a particular station has a height of 125 m. For doubling the coverage of its range, the height of the tower should be…2022
- An amplitude modulated wave is represented by C_m(t)=10(1+0.2 cos 12560 t) sin (111 × 10^4 t) volts. The modulating frequency in kHz will be \ \ \ \.2021
- The maximum and minimum amplitude of an amplitude modulated wave is 16 V and 8 V respectively. The modulation index for this amplitude modulated wave…2021
- An amplitude modulated signal is plotted below: Which one of the following best describes the above signal?2019
- Given below are two statements: Statement I: A speech signal of 2 kHz is used to modulate a carrier signal of 1 MHz. The bandwidth requirement for…2021
- A modulating signal 2 sin (6.28 × 10^6) t is added to the carrier signal 4 sin (12.56 × 10^9) t for amplitude modulation. The combined signal is…2022
- A message signal of frequency 3 kHz is used to modulate a carrier signal of frequency 1.5 MHz. The bandwidth of the amplitude modulated wave is2023
JEE Main 2016 Physics question, with the answer from NTA’s final answer key. Where our answers come from.